Unitherm Insulation Systems

by

The New Heating System that will Radically Change the Way You Heat

Imagine a world where heat is always consistent, quick, efficient, and safe. Imagine a heating system that is 70% more efficient than the way you heat now and still safe enough to touch with bare hands. Is this some distant dream, or have we truly arrived at the future of heat technology?

At NPE 2012, UniTherm International introduced its latest product—RapidTherm, an innovative heat solution designed for plastics machinery. UniTherm has been manufacturing insulation jackets for over 20 years, but this new jacket is truly the first of its kind.

RapidTherm is unique in that it combines heating elements and insulation in one easy to use, easy to service unit. The 1-piece, removable insulation jacket includes a built-in thermal vein powerful enough to heat an entire machine. Not only is the thermal vein a more efficient heat source than traditional heater bands, but because it’s encased in high temperature insulation, it saves energy by eliminating excess heat loss.

In tests, the RapidTherm jacket heated barrels twice as fast (cutting start up time in half) and dramatically decreased energy usage. On production equipment, the new heating system

  • Decreased start-up time by 50%,
  • Cut energy usage by 70%
  • Kept the outer surface cool enough to comply with OSHA hot surface standards
  • Increased worker safety
  • Cut maintenance time and costs
  • Eliminated hot spots on the barrel heating profile
  • Eliminated the need for a barrel shroud

RapidTherm has proven itself as an efficient heating system and promises to liberate processors from the hassle of heater bands. “For years, we’ve known there has to be a better, more efficient way to heat machines,” explains UniTherm president Dan Sherrill. However, previous alternatives to heater bands have been plagued with problems. NPE 2012 was the perfect opportunity to unveil the new heating system, and RapidTherm sparked interest among processors looking to save time and money at their machines. It seems RapidTherm will be the solution that finally puts the heater band headache to rest.

It’s certainly an exciting time for new technology in engineering and manufacturing. Subscribe to our blog for more innovative ideas and industry updates.

by

See it to Believe it: The Benefits of Thermal Imaging

When thinking about energy output in a manufacturing plant, it’s natural to go to the lights and the HVAC. This makes sense since these are typically the top energy expenditures, but it’s a plant’s machines that devour more energy than all other utilities combined. That’s right, machines consume about 60% of total energy costs. How do we know this? Well, government agencies and other entities provide plenty of studies and statistics for us to read over, but why not see the energy output for yourself?

Thermography is more than fancy spy gear for secret agents to expose hidden enemies—it has a wide range of commercial and industrial applications for those of us in the real world as well. For manufacturers, thermal imaging allows you to visually track the amount and consistency of heat emitted by your equipment. With a thermal camera, you can compare the output of the different heat sources (even those not-so-easy-to-access heat sources) in your facility from a comfortable distance. This way you can find defects in shafts and pipes and locate deteriorating components before they fail.

Equipped with a thermal picture (a thermogram, in case you want to sound technical), you can easily spot the energy hogs highlighted in yellow, orange, and red—so you know exactly what areas to target as you take steps to reduce your energy costs.

Thermal Imaging

 

Immediately you’ll see your machines light up hot—as they should, that’s how they work. But most likely they don’t need to be operating that hot or emitting as much heat as they do.

The good news? Machines represent your greatest opportunity to conserve energy. Instead of idling, consider powering down equipment during non-peak hours, make sure motors are working as efficiently as possible, and insulate, insulate, insulate. The ROI is remarkable—insulation saves an average of $164 per machine per month. See what thermal imaging reveals so you can start saving.

by

The Best Ways for Manufacturers to Save Energy: Surveying the Site

Who doesn’t want to save energy? Now more than ever, we are all looking for ways to cut back—we turn down the lights and turn off the thermostat, we run the dishwasher less and take shorter showers—hoping to save some money on the monthly energy bill.

But when you run a large manufacturing plant, the task of saving energy may be a bit more daunting. Before you can start conserving energy, you have to know where the most energy is being consumed and what the best opportunities are for reducing high-energy output.

Knowledge is power, so we’ve put together a simple site survey checklist to help managers get well acquainted with their plant’s energy output. According to the Energy in Plastics Good Practice Guide, you should carry out an initial survey immediately because “if energy is being wasted, it is costing money.” A 20% cut in energy costs can equal the same bottom line benefit as a 5% increase in sales.

It’s also a good idea to take an unannounced walk around the site at about mid-shift to see how things are running during normal working hours.

What to look for during an initial walk through
Keep a close eye on the machines. Machines consume about 60% of energy costs. Yikes. But think of it this way—here lies your greatest opportunity for energy savings.

As you survey the site, keep these questions in mind:

  • Which areas have the largest energy load? Look for the largest machines; they will have the largest motors and consume the most energy.
  • Which motors are running? Would smaller motors be more efficient? Could they be turned off during non-peak hours?
  • Are machines well insulated? Is the insulation in good condition?
  • Are hot and cold pipes insulated? Is the insulation in good condition?
  • Which cooling water pumps and vacuum pumps are running?
  • Does compressed air pressure need to be so high, or the vacuum so low? Can you hear steam and compressed air leaks?
  • Are lights and machine heaters left on? What is running during lunch breaks and and after working hours?

With a better understanding of where unnecessary energy output occurs, you can now take productive steps to decrease it. Don’t wait—conduct your site survey today to start saving energy and increase that bottom line!

*Statistics from European Best Practice Guide.

by

Plastics Manufacturing Insulation Jackets – Site Visit, Manufacturing, Install, and Support

At UniTherm International it is our goal to provide outstanding experiences and solutions for our customers. If you are in the plastics industry this post can serve as a guide to the process of outfitting your facility with UniTherm products. [Read more…]

by

Energy Efficiency in Plastics Manufacturing


The US Department of Labor reports that the energy management sector has more than doubled in the last two years, with 75% of all jobs in an industrial setting. While energy managers prove a valuable asset to large corporations, many plastics manufacturers with a slimmer budget are tasking current employees with energy related projects.

So how does a non-energy-expert implement energy saving projects? As with any project, the first task lies in evaluating the current situation, researching potential options for improvements, and calculating the potential results of each option.

What are your true energy costs?

With home energy costs, lighting and temperature control usually come to mind as the biggest portion of energy costs. This isn’t the case in plastics manufacturing, according to a recent study focusing on the balance of energy usage in an average plastic plant. Energy consumption for lighting, temperature control and ventilation equate to just over a third of the energy that machines use in most plastics facilities.

While specific energy consumption of machinery varies slightly from plant to plant, there is virtually no difference between the amount of energy consumed in injection and extrusion molding.

A critical first step in any successful energy management plan for a plastics facility is ensuring that machines, which account for 60% of all energy consumption, operate as efficiently as possible.

 

Energy-saving Measures for Extrusion and Injection Molding 

To reduce energy use in extrusion processes, consult with production managers and plant engineers to optimize equipment performance. In many cases optimization of the extruder speed can significantly lower energy usage without impacting end results.

[Read more…]

Quick Links

MSDS
Product Brochures
Energy Study Library
Product Videos

Follow UniTherm

Facebook
Twitter
Blog
YouTube
Instagram
Pinterest

UniTherm Insulation Systems

711 Jones St.
Lewisville, TX 75057
Toll Free: 800.657.9542
Phone: 972.436.1401
Fax: 972.436.0112
info@unitherm.com